|
|
本文轉載於WarClouds User : 5AF_8FS_Doc
Ok, I promised to make a post about how to get 4.10 working with the mods. And as promised, here it is:
I am going to start from the very beginning, now you can follow each step as listed here or just pick the step that fits your current install and start from there.
If you want to run 4.10 in conjunction with 4.09 and UP 2.01, then you will need to do the following
First off, go into your UP 2.01 folder and run JSGME.
Second: Disable all mods that are currently activated in the 4.09 UP2.01 enabled game.
Third: Download the following file: http://www.filefront.com/17695928/Il2_410.exe/ and save it anywhere. Once it is downloaded, extract the file, it should have an exe file. Open this EXE and point the install path to your root il2 1946 folder. Click install and let it do its business. Once it is finished, simply go into your UP 2.01 folder and click on JSGME. In JSGME you should have a mod labeled 00_Stock_4.10m, all you have to do to get STOCK 4.10 is enable this mod. Once enabled, your game should be running 4.10 - to check just start il2 and look at the startup screen, it should say 4.10m in the lower left hand corner.
To get your game back to 4.09 modded, all you need to do is simply disable the 00_Stock_4.10m mod and enable the mods you were previously running with 4.09. To double check your game, start it and look at the same corner. This time it should start up with the UP2.01 screen and have 4.09m in the lower left corner.
If you want to run 4.10 with mods enabled, you must do the following.
REMEMBER! ONCE YOU DO THIS YOU WILL NOT BE ABLE TO FLY 4.09 ANYMORE! WARNING!
Ok, here is where it gets complicated and tiring. First thing you need to do is go into your old UP 2.01 folder and backup a few files by copying them (right mouse button > copy) then paste them on your desktop (right mouse button > paste). The files are as follows: conf.ini - users folder - il2setup.ini - paintschemes folder - missions folder. You can cut out the paintschemes folder and missions folder if you do not have any custom skins or maps you want to save. You might also want to consider saving your records folder if there are any tracks you want to save.
Once you have those files/folders backed up, proceed with wiping out your install of IL2. I mean everything, even the mods. Clean it out - all of it. Best way to do this is go into your directory and delete the Ubisoft folder. If you have more than one ubisoft game, then only delete the il2-1946 folder instead. Once this is done, proceed with REINSTALLING your game from the DISK - or if you are one of the few who has a digital download copy, access that digital download to install it.
Once installed, you need to patch your game accordingly. When you install 46 from the disk you should have version 4.07 already. Therefore, you need to patch the game from 4.07 all the way to 4.10 - incrementally, this can take a bit of time. Run patch 4.08 first; once that is done run patch 4.09 as well as 4.09 skins patch; once that is done finally run 4.10 patch.
Now comes the fun part! The mods!
But first, remember those files we backed up? Yeah those ones we put on the desktop... we need to place them into the new install for il21946. Take all those files and dump them directly into the il2-1946 directory and when it asks if it is ok to overwrite tell it YES. This will add back into the game your key settings, your video settings and the whole shabang!
After that, we need to yet again backup a few things just in case we do something wrong - that way we don't have to start all over again. Go into your il2-1946 folder and backup the following: wrapper.dll and il2fb.exe. Place these in a safe spot outside of the il2-1946 folder.
Now we can get to the fun part!
First step:
Download: Generic Mods Enabler. This is basically JSGME, however w/o all of the mods. Once you have this file downloaded, run the setup.exe file. It will ask you some questions about where to install the program. Install it into your il2-1946 folder. It will ask you about making a mods folder for it, when this step comes up name it JSGMEMODS or something similar. Once finished, check to make sure that the JSGMEMODS folder is in the il2-1946 folder.
Second Step:
Download SAS MOD ACT. Extract the contents of the file into your il2-1946 folder. When asked to overwrite, say YES TO ALL. After you get this installed, open the game and check to make sure that the game has the changed start screen. It should say 4.10m int he lower left corner and the screen itself should have a biplane getting shot up by a machii italian fighter.
Third Step:
Download 6DOF for 4.10. Once downloaded, extract the contents. There should be two files: One folder named 6DOF Tracker and there should be an il2fb.exe. Take the folder and put it into that JSGMEMODS folder. Take the il2fb.exe and replace your existing il2fb.exe in the il2-1946 directory.
Fourth Step:
Download Plutonium Effects Mod. This mod is the latest effects mod from H& . UP2.01 came with the uranium version. If you did not use uranium version before the update then forgo this mod. Once the mod is downloaded, take the existing folder and place it again in the JSGMEMODS folder.
Fifth Step:
Download SAS Smoke pack for weapons. This mod adds the modded smoke trails as you see in UP2.01. Extract the contents and once again, take the folder and place it in your JSGMEMODS folder.
Sixth Step:
Download Plane Shine Mod. This mod adds the glints and such to canopy's and shiny surfaces in the game. Once downloaded, extract and take the folder and put it in your JSGMEMODS folder.
Last Step (can you believe it?):
Download Distant Sounds Mod. This mod adds the modded sounds BACK INTO THE GAME! YAY! These sounds are slightly different than the ones from UP 2.01, however they sound just as good (if not better IMO!). Extract the contents and take the folder and place it yet again in your JSGMEMODS folder.
Now we come to the part where we activate the mods. When you installed the Generic Mods Enabler you should have gotten a JSGME exe file in your il2-1946 folder. If it is there, open it. This JSGME runs just like UP2.01 JSGME. When it is open, you should see all of the mods that we installed in the JSGME left side. Now just take all the mods int he left side (minus the maps and the std folders) and click the move to right or the > button. This should enable all of the mods for you. To test, just start the game up and go into your tracks and run the !ALL.ntrk track. This will run a track that has a lot of activity and you should be able to tell if the mods are working or not by listening. The only mod you wont be able to test this way is the 6dof. Obviously to test this just go into a QMB and see if it works.
Ok... so we are done, this is as close as we can get to what we had in UP2.01 until they update. As far as I know right now planes cannot be added in yet; it is not like that really matters either because for the time being the mod planes have been removed from the wcwf plane set I believe (b17/24).
If you have any questions please post here and I will do my best to answer them for you. If you need further help in setting this up please let me know and we can try and meet on teamspeak to get it resolved.
S~
P.S.
BL You might want to sticky this so people check here first before making another "4.10 mods post".
S~
但~!重點來了~!
這只能算假的6Dof
只有在飛機做滾轉大G時才會讓你看到6點
不能想看就看~!
我要以前的6DOF啦~ |
358, php, 视频, 中国, 导弹, 电影, 飞行, 飞行员, 活动, 武器, 战斗机, 358, 飞行, insky, sky, 编队, 黑鸦, 主机, 视频, 358, F15, IL2, insky, lock, 航母, 活动, 降落, 申请, 资料, insky, sky, 设置,
|
发表于 2011-2-13 18:34:06
发表于 2011-2-14 05:53:24
