|
|
[inSky工作组]J-8F MOD Final 2.7 发布最终完整版
==============================================================================
China J-8F MOD Final 2.7
J-8F MOD制作时间历时3个月，由inSKy工作组成员xiaoyer完成了J-8系列 MOD的最终版：J-8F，并由inSKy工
作组成员RICK进行修改测试。
用LOMAN 2.1压缩而成，支持LOMAN及MODMAN的安装，在装本MOD之前，请作好相关备份。这个MOD仅支持LOCK
ON1.1、1.12a版本，不支LOCK ON1.01、1.02。
此款MOD,J-8F替换了SU-24。
经过一系列测试，现将J-8F MOD最终版发布给各位爱好模拟飞行的朋友
J-8F与J-10共存及安装顺序说明：
请大家下载对应J8F MOD的最新版本J10 MOD：China J-10 Mod final 2.2
只要先装了中国补丁之后，J10、J8F MOD两个都装或只装一个都行，不与其它补丁发生冲突。
祝大家飞行愉快！
下面是各补丁在LOCK ON中的安装目录（最好用LOMAN或者MODMAN解压）
涂装文件(.bmp&.tga)：X:\......\Ubisoft\Eagle Dynamics\Lock On\Bazar\TempTextures;
代码文件(.xml)：x:\......\Ubisoft\Eagle Dynamics\Lock On\ME;
LOM及SKINS文件(.lom&.skins)：X:\......\Ubisoft\Eagle Dynamics\Lock On\Bazar\World\Shapes;
inSky*FA_967/xiaoyer
inSky-工作组 ( http://www.insky.cn/ )
E-mail:insky-967xiaoyer@163.com
解压密码：见二楼
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
如以上下载链接失效，请尝试以下链接
本地址下载后请将后缀名改成.exe，解压密码见２楼！
[inSky Workshop]J-8F MOD Final 2.7 Full Version Published
==============================================================================
China J-8F Mod final 2.7
It takes about 3 months to make the J-8F MOD and the J-8 MOD's final version:J-8F was finished
by xiaoyer of inSky workshop and tested and modified by inSky work shop Rick。
The J-8F was compressed by LOMAN 2.1，so it could be installed by LOMAN and MODMAN. Before you
install this MOD，please backup your files in advance。 This MOD only support LOCK ON1.1 version
and 1.12a version，NOT support LOCK ON version 1.01、1.02。
This MOD's using J-8F to replace SU-24。
After the test, we are now publishing this J-8F MOD Final Version to all the Flight Simulate
lovers.
How to keep the J-8F and J-10 together and the installing step description：
For the players who have already installed the China mend and J-10 mend, please use LOMAN or
MODMAN to install the J-8F mend directly。
For the players who have NOT installed the China mend and J-10 mend, if you want only the J-8F
mend to be installed, please install the China mend before you install the J-8F mend。
This MOD can run with the original J-10 mend normally，and wil NOT conflict with the other mends.
Hope you all enjoy your flying!
Please refer to the install path for each mend in LOCK ON below（We suggest using LOMAN and MODMAN
to decompress）
application files(.bmp&.tga)：X:\......\Ubisoft\Eagle Dynamics\Lock On\Bazar\TempTextures;
code files(.xml)：x:\......\Ubisoft\Eagle Dynamics\Lock On\ME;
LOM and SKINS files(.lom&.skins)：X:\......\Ubisoft\Eagle Dynamics\Lock On\Bazar\World\Shapes;
inSky*FA_967/xiaoyer
inSky-Workshop ( http://www.insky.cn/ )
E-mail:insky-967xiaoyer@163.com
2008.05.03 inSky MOD工作组Xiaoyer
提示下:测试多次次,对歼八F MOD来说,标准的接地速度为290,保险的接地速度为300~310
[ 本帖最后由 RICK 于 2008-6-7 00:32 编辑 ] |
lock, Series, insky, WOI, lock, Muhahaha, 飓风中队, xsi, RICK, Google, WOI, 358, amp, IL2, php, 飞行, 飞行员, 射击, Freefly, WOI, WOI, LD-767, Intel, lock, WOI, Saitek, EVO, HAWX,
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有帐号？立即加入
x
|
发表于 2008-5-3 01:23:01
