How to program mouse button holds on the Rhino X55.
Posted by Warranty Support on 27 February 2014 11:38 AM
You can program mouse button holds on any programmable button by doing the following:
Open the HUD Software, left-click on the PROGRAMMING tab and choose the stick or throttle to program. In this example we will choose the throttle.
Mouse over the button you want to program, and then left-click on the arrow that appears.
Left-click on ‘New Advanced Command…’ in the window that appears.
You will now be in the Advanced Command section.
Left-click on the ‘Record Mouse’ button and then mouse click once in the ‘Press’ section to record the mouse click.
You will now need to remove the mouse button release function from the ‘Press’ section.
To do so, left-click on the ‘Record Mouse’ button again to stop the mouse from recording.
Left-click on the mouse button release in the ‘Press’ section to highlight it.
Right-click on the mouse button release to bring up the window containing the option to delete the function, and then choose ‘Delete.’
You should now only see the mouse button press in the ‘Press’ section.
Click the ‘OK’ button to finish the programming.
Save and activate the profile to complete the process.
发表于 2016-2-5 12:42:56
发表于 2016-3-4 23:41:16