|
|
本帖最后由 Attack 于 2012-10-13 09:57 编辑
http://forum.1cpublishing.eu/showthread.php?t=34902
也没什么新东西。修正修正再修正......
Please help us with mirrors!
Please note that this version is incompatible with previous versions when playing online.
Please download the file and extract the archives to your steam game directory, which is usually
C:\Program Files (x86)\Steam\steamapps\common\il-2 sturmovik cliffs of dover
This patch contains the entire contents of RC1 + hotfix, so its readme applies as well.
Readme for the latest version:
AIRCRAFT
- RAF engines no longer stop at idle;
- Made corrections to rough running on non warmed Merlin engines. Engines still require to be warmed up and won’t work properly when too cold.
Please note that engines still start with oil and water at colder temperatures. With Hurricanes, please keep throttle back until the temperature is at least 45 degrees C (takes about 50 seconds after start at external temperature of +20 C);
- Corrected Hurricane boost indications. Previously shown +5.5Lbs Boost with full throttle, now properly displays +6.25 from Ground level all the way up to Full Throttle height;
- Fixed issue that occasionally caused planes with landing gear raised to still show it in the down position;
- Corrected Hurricane weights. Please note that in-game weights are slightly different from those used in RAF documents, especially what the game calls empty weight. Our fuel is also slightly heavier. The weights in-game have been further finetuned to match desired performance.
Decreased empty weight on the Hurricane improved turn rate, climb rate, and speed characteristics at all altitudes;
- Corrected Hurricane 1 100-Oct Mixture lever operation. It no longer requires Mixture lever Forward to maintain smooth engine operation with Boost Cut out activated. Mixture Lever should now be properly held Back for Boost Cut Out operation;
- Corrected SPIT MK IA 100-Oct Mixture Lever operation;
- Corrected rough running on Merlin engines above 11,000 ft;
- Corrected Bf.109E-4 auto prop pitch operations. Max RPM target should now be the proper 2400 RPM;
- Corrected control surface angles on the Hurricanes according to historical documents;
- Added drag to canopies opened in-flight on all aircraft;
- Greatly increased the effects of punctured radiators on engine temperature to make the effect more noticeable;
- Corrected radiator drag on the Bf.109s;
- Corrected weights on Fiat G.50;
- Corrected boost operations on British engines;
- Fixed the inaudible hit sounds online bug;
- Made corrections to Su-26 flight model. The plane is now less helicopter-like on take-off;
- Corrected skid ball on the Su-26 to work in the proper direction;
- Corrected the RPM indicator operation on the Su-26;
- Fixed Su-26 landing gear position when on the ground;
- Fixed the issue that occasionally caused never-ending Stuka horns online;
- Corrected external exhaust lights that could erroneously be seen from the cockpit;
- Corrected issue with the display of vapor trails;
- Restored AOA-based tip streamers.
GRAPHICS & MISC
- Added racing pylon models for air races. We’d like to thank Rasim Mullahmetov for supplying the model!
NOTE: Hitting a pylon will not currently damage the aircraft. However it will create a special OnStationaryKilled event that servers or mission designers can use to track mission points;
- Corrected Z_Offset parameter in online missions. Mission objects will now properly offset based on mission designer’s input;
- Corrected radio beacon code online;
- Fixed rare crashes connected to improper Road or LinearObjectManager usage in custom missions.
Note about NVidia SLI:
The patch must go through official NVidia accreditation for SLI support to be officially enabled in drivers. The patch will only go through the process once it’s officially released on steam.
If you wish to bypass this process and manually enable SLI support, please go through the following steps:
1) Download a profiler utility, for example
http://nvworld.ru/utilities/sliprofiletool/
2) Export SLI profiles to a file
3) Manually edit the file by adding the following lines
Code:
Profile "Il2: Cliffs of Dover"
ShowOn GeForce
ProfileType Application
Executable " il-2 sturmovik cliffs of dover/Launcher.exe"
Setting ID_0x00a06946 = 0x000240f5
Setting ID_0x1033cec1 = 0x00000001
Setting ID_0x1033cec2 = 0x00000002
Setting ID_0x1033dcd2 = 0x00000004
Setting ID_0x1033dcd3 = 0x00000004
Setting ID_0x1095def8 = 0x00000004
EndProfile4) Re-import the file
5) Fly!
IMPORTANT: Please note that
Executable " il-2 sturmovik cliffs of dover/Launcher.exe"
must point to the actual location of the game’s executable. If you have installed the game to a different folder, please edit the line accordingly.
请帮助我们用镜子！
请注意，在线播放时，与以前的版本，这个版本是不兼容的。
请下载该文件，并提取您的Steam游戏目录下的档案，通常是
C：\程序文件（x86）\蒸汽\ \ COMMON \ IL-2 sturmovik悬崖多佛steamapps
RC1 +修补程序，此修补程序包含的全部内容，所以其自述也同样适用。
自述文件的最新版本：
飞机
- RAF引擎不再停留在空闲状态;
- 更正粗糙运行在非加热的默林发动机。 发动机仍然需要进行预热，将无法正常工作时，太冷了。
请注意，引擎仍然启动油和水在较低温度下。 飓风，请保持油门，待温度至少45度C（需时约50秒后开始在外部温度为+20°C）;
- 修正了飓风提升的迹象。 先前的研究显示，5.5磅提升全油门，现在可以正确地显示+6.25，从地面一直到烈火战车的高度;
- 固定的问题，偶尔导致飞机起落架上调至仍然显示在靠下的位置;
- 修正了飓风的权重。 请注意，在游戏中的权重从英国皇家空军文件中所使用的略有不同，特别是游戏中所谓的空重。 我们的燃料也稍重。 在游戏中的权重得到了进一步的精密调整，以符合所需的性能。
空重降低，的飓风改进转率，爬升率，在所有高度和速度快的特点;
- 修正了飓风100 10月1混合杆操作。 它不再需要混合杆，以维持发动机平稳运行升压切出激活。 ，混合杆应正确举行升压切出操作;
- 修正了SPIT MK的IA 10月100日的混合物杆操作;
- 修正了粗糙的运行的默林发动机1​​1000英尺以上;
- 修正Bf.109E-4自动支柱间距业务。 最大的RPM现在的目标应该是正确的2400 RPM;
- 修正了控制面角度的飓风，根据历史文献;
- 添加拖动檐篷打开所有飞机的飞行;
- 大大增加发动机的温度，使效果更加明显收缩散热器的效果;
- 修正散热器阻力的Bf.109s;
- 修正了菲亚特G.50的权重;
- 修正了在英国的发动机提高业务;
- 修正了听不见的命中听起来线上错误;
- 更正苏-26的飞行模式。 这架飞机是直升机上起飞;
- 修正了防滑球的Su-26的工作在正确的方向;
- 修正的的RPM指标操作的Su-26;
- 固定的苏-26的起落架位置时，在地面上;
- 修正了这个问题，偶尔网上引起无休止的斯图卡角;
- 修正了会错误地从驾驶舱的外部排气灯;
- 修正问题的水汽路径与显示;
- 恢复AOA尖幡。
图形和MISC
- 增加了空气的比赛中赛塔模型。 我们要感谢拉西姆·Mullahmetov提供模型！
注：击中塔目前不会损坏飞机。 然而，它会创建的一个特殊OnStationaryKilled事件的服务器或任务设计者可以用它来跟踪任务点;
- 修正了在网上的任务Z_Offset参数。 任务对象现在将正确地抵消基于任务设计的输入;
- 修正了无线电信标码在线;
- 修正了罕见的崩溃连接到不正确的路或LinearObjectManager的使用在自定义任务。
关于NVIDIA SLI的注意事项：
修补程序必须通过官方的NVIDIA认证为正式启用SLI支持的驱动程序。 补丁将要经历的过程，一旦它的正式发布蒸汽。
如果你想跳过这个过程，手动启用SLI的支持，请通过下面的步骤：
1）下载一个分析器实用工具，例如
http://nvworld.ru/utilities/sliprofiletool/
2）出口SLI配置文件到一个文件
3）手动编辑该文件，加入以下几行
代码：
简介“IL2：多佛尔悬崖”
ShowOn的GeForce
ProfileType应用
可执行文件“IL-2 sturmovik悬崖多佛/ Launcher.exe”
设定ID_0x00a06946 = 0x000240f5
设定ID_0x1033cec1 = 0X00000001
设定ID_0x1033cec2 = 0x00000002
设置ID_0x1033dcd2 = 0x00000004
设置ID_0x1033dcd3 = 0x00000004
设定ID_0x1095def8 = 0x00000004
EndProfile
4）重新导入文件
5）飞！
重要提示：请注意，
可执行文件“IL-2 sturmovik悬崖多佛/ Launcher.exe”
必须指出的游戏的可执行文件的实际位置。 如果您已经安装了游戏，到不同的文件夹中，请相应地编辑该行。
下载地址：
http://kuai.xunlei.com/d/SXXKTLLVQLCU
|
|
发表于 2012-10-12 22:45:37
楼主
