[SF2]请教怎么让装在发射筒里的导弹不是裸体出现在挂架上
最近在修改米24P的武器，打算模仿这张照片，给最外侧两枚反坦克导弹的下面，再挂一枚防空导弹用来打灰机自卫。于是找来了SA18的MOD文件。然而，如果只给挂点设置挂ISM，SA18就变成裸体挂在挂架下面。
非要把发射筒的参数从WeaponDataType=6改成WeaponDataType=2，就是发射架属性变成火箭巢属性，才能以装在发射筒中的形象挂在挂架下面。
请高手指教这是为什么？这样一来在选择对地武器时，也会选择到SA18的。
这是米24上的挂点设置
SystemType=WEAPON_STATION
StationID=10
StationGroupID=4
StationType=EXTERNAL
AttachmentPosition=3.0495,-1.91,-0.29
AttachmentAngles=0.0,0.0, 0.0
LoadLimit=100.0
LengthLimit=2.0
AllowedWeaponClass=IRM
AttachmentType=WP,SOVIET
ModelNodeName=9M39
PylonMass=25
发射筒的参数是这样的
TypeName=9M39
FullName=9M39 (SA-18)
ModelName=9M39_LP_S
Mass=5.190000
Diameter=0.196000
Length=1.98000
SubsonicDragCoeff=0.200000
SupersonicDragCoeff=0.770000
AttachmentType=SOVIET
SpecificStationCode=
NationName=SOVIET
StartYear=1981
EndYear=2020
Availability=2
BaseQuantity=24
Exported=TRUE
ExportStartYear=1986
ExportEndYear=2020
ExportAvailability=2
WeaponDataType=6
WeaponsRackType=TLR
RocketTypeName=9M39_Missile
NumRockets=1
LoadLimit=40.000000
LengthLimit=1.600000
MaxFuelAmount=0.000000
Attachment01Position=0.000000,0.000000,0.000000
Attachment01Angle=0.000000,0.000000,0.000000
如果改成火箭巢，这是这样
TypeName=9M39
FullName=9M39 (SA-18)
ModelName=9M39_LP_S
Mass=5.190000
Diameter=0.196000
Length=1.98000
SubsonicDragCoeff=0.200000
SupersonicDragCoeff=0.770000
AttachmentType=SOVIET
SpecificStationCode=
NationName=SOVIET
StartYear=1981
EndYear=2020
Availability=2
BaseQuantity=24
Exported=TRUE
ExportStartYear=1986
ExportEndYear=2020
ExportAvailability=0
WeaponDataType=2
RailLaunched=FALSE
RocketTypeName=9M39_Missile
NumRockets=1
ROF=0.500000
FireEffectName=RocketPodEffect
FireEffectTime=0.150000
FrontCoverNodeName=FrontCove
RearCoverNodeName=RearCover
ShowRockets=TRUE
Rocket01Position=0.000000,0.000000,0.000000
还有一点忘说了，图1蓝圈里的火箭巢，我找了好些MOD包里都找不到。请问谁有呢？ 可能，系统设定的，对空导弹都是裸装，对地武器是桶装;P 您也许可以找YEYEYE问一下，这是他做的，当然也可以到这里讨论一下http://combatace.com/forum/272-thirdwire-strike-fighters-2-series/ http://combatace.com/forum/150-chinese/
页:
[1]